HYDRAULIC FEED SYSTEM
- Pulldown force: 16,200 lbs [7,348 kg]
- Retract force: 24,000 lbs [10,886 kg]
- Feed speed, down: 0-74 ft/min [0-23 m/min], 0-149 ft/min [0-45 m/min]
- Feed speed, retract: 0-50 ft/min [0-15 m/min], 0-100 ft/min [0-30 m/min]
- Feed stroke: 13 ft [3.96 m]
- Angle Drilling Capable
POWER UNIT
- Deck Engines: John Deere, Cummins, Deutz Diesel
- PTO: Transmission or Transfer Case
DRILL HEAD ROTARY
- 8 Speeds
- 4-5/8 in [118 mm] ID Open Spindle
- No Chains, No Right Angle Drive
- Drive: Helical Gear
- Max Chuck Size: P Wireline
- Maximum Rotary Speed: 1,055 rpm
- Maximum Torque: 8,000 ft-lbs [10,847 Nm]
ESTIMATED OPERATING CAPACITIES
- Hollow Stem Augers, 4-1/4 in [108 mm] ID: 175 ft [53 m]
- Continuous Flight Auger, 6 in [152 mm] OD: 300 ft [91 m]
- Rotary Drilling, 4-1/2 in [114 mm] OD Drill Pipe: 600 ft [183 m]
- Diamond Core Drilling, N Wireline: 2,500 ft [762 m]
- Reverse Circulation: 4-1/2 in [114 mm] CIP Drill Pipe: 600 ft [183 m]
- Note: Above drilling capacities may vary according to subsurface conditions and rotary head option.
HOISTS
MAIN
- Single Line Capacity: 12,000 lbs [5,443 kg]
MAIN
- Single Line Capacity: 8,500 lbs [3,856 kg]
AUXILIARY
- Single Line Capacity: 4,500 lbs [2,041 kg]
WIRELINE – A Wide Variety Available
- Line Capacities from 700 ft [213 m] to 7,500 ft [2,286 m]
SAFE-T-DRIVER
- Single Line Capacity: 900 lbs [408 kg]
OPTIONAL EQUIPMENT
- Angle Drilling
- Mast Dump (Vertical Mast Slide)
- In-Out & Sideways Slide Base
- SPT Automatic Hammer, ASTM D-1586, 140 lb [64 kg], 170 lb [77 kg], 300 lb [136 kg], 340 lb [154 kg] Slugs Available
- Custom Breakout Table Designs
- Make/Break Double Rod Clamp System
- Hydraulic Breakout Wrench
- Water Pumps – Piston, Centifugal and Progressive Cavity
- Water/Foam Injection Systems
- Air Compressors
- Jib Boom Hoist
- Swing-Out Under Body Auger Racks
- Rod Trough
- Rod Loader
- Water Tanks
- Driller/Helper Platforms
- Safety Cage Options
- Night Lights
