FEED SYSTEM
- Pulldown force: 15,708 lbs [7,125 kg]
- Retract force: 24,544 lbs [11,133 kg]
- Feed speed, down: 53 ft/min [16.2 m/min]
- Feed speed, retract: 34 ft/min [10.4 m/min]
- Feed stroke: 6 ft [1.8 m]
POWER UNIT
- Deck Engines: John Deere, Tier 4, 74 hp or Deutz Diesel
Drill Head Rotary
- Total enclosed “dry box” with tapered roller bearings.
1-3/4” Steel Kelly Drive Bar - Open Spindle Bore: 2 in [51 mm]
- Maximum Torque and rpm (Engine Specific):
- John Deere: 9,876 ft-lbs [13,390 Nm] @ 20 rpm, Maximum 618 rpm
- Deutz: 7,110 ft-lbs [9,640 Nm] @ 20 rpm, Maximum 669 rpm
Hoists
- Main-Single Line Capacity: 6,000 lbs [2,722 kg]
- Main-Single Line Capacity: 4,500 lbs [2,041 kg]
- Safe-T-Driver/Wireline: 900 lbs [408 kg]
- Wireline Hoists – A Wide Variety Available
Line Capacities from 700 ft [213 m] to 7,500 ft [2,286 m]
Estimated Operating Capacities
- Hollow Stem Augers, 4-1/4 in [108 mm] ID: 130 ft [40 m]
- Continuous Flight Auger, 6 in [152 mm] OD: 225 ft [67 m]
- Rotary Drilling, NWJ/NW: 1,000 ft [305 m]
- Diamond Core Drilling, N Wireline: 900 ft [275 m]
Note: Above drilling capacities may vary according to sub-surface conditions, hoist capacity and rotary head option.
Optional Equipment
- Mast: 20 ft [6.1 m] or 25 ft [7.6 m]
- In-Out/Side-to-Side Slide Base
- SPT Automatic Hammer, ASTM D-1586, 140 lb [64 kg],
170 lb [77 kg], 300 lb [136 kg], 340 lb [154 kg] Slugs Available - Custom Breakout Table Designs
- Make/Break Double Rod Clamp System
- Hydraulic Breakout Wrench
- Water Pumps – Piston, Centrifugal and Progressive Cavity
- Water/Foam Injection Systems
- Swing-Out Under Body Auger Racks
- Water Tanks
- Driller/Helper Platforms
- Safety Cage Options
- Night Lights
NOTE: Engineering specifications are theoretical, actual performance will be different, specifications are subject to change without notice.
