B45

FEED SYSTEM

• Pulldown force: 15,708 lbs [7,125 kg]
• Retract force: 24,544 lbs [11,133 kg]
• Feed speed, down: 53 ft/min [16.2 m/min]
• Feed speed, retract: 34 ft/min [10.4 m/min]
• Feed stroke: 6 ft [1.8 m]

HYDRAULIC SYSTEM

• Tandem hydraulic pumps

  Primary

  Variable displacement load sense pump 28 gpm [106 l/min] @ 3,500 psi [24.0 MPa]

  Auxillary

  Vane type pump, 17 gpm [64.3 l/min] @ 2,500 psi [17.2 MPa]

• Electric fan type hydraulic oil cooler
• 40 gal [151.4 l] hydraulic oil tank

POWER UNIT

• Engines include a 12V starting circuit.
• All engine gauges located on the control panel.
• 40 gallon (151.4 l) fuel tank with lock.
• Lockable battery box.
• John Deere 4024HF285 Tier 3
  80 Hp (60 kw) @ 2400 rpm, developing 209 ft-lb (283 Nm) torque, water cooled, 2.4 | diesel engine.
• Deutz TD2011LO4I Tier 3
  75 hp (56 kw) @ 2600 rpm, developing 184 ft-lb (250 Nm) torque, air cooled, 3.62 | diesel engine.

POWER SHIFT TRANSMISSION

• 4-speeds forward and 1-speed reverse
• Transmission oil cooled through a dedicated electric fan type cooler
• 10 micron replaceable oil filter

ESTIMATED OPERATING CAPACITIES

• Total enclosed “dry box” with tapered roller bearings.
• 1-3/4” steel Kelly drive bar
• Open spindle bore: 2 in [50.8 mm]
• Maximum torque and maximum rpm (engine specific):
  John Deere – 8,085 ft-lb [10,961 Nm] @ 20 rpm, Maximum 618 rpm Deutz – 7,110 ft-lb [9,640 Nm] @ 20 rpm, Maximum 669 rpm

MOUNTING OPTIONS

• Truck, trailer, track carrier or skid

HOISTS

MAIN

• Single line capacity: 4,500 lbs [2,041 kg]
  • Line speed: 0–135 fpm [41.2 mpm]
  • Cable diameter: 5/16 in (.325) [8.3 mm]
  • Cable length: 100 ft [30.5 m] standard

SAFE-T DRIVER

• Single line capacity: 900 lbs [408.2 kg]
  • Line speed: Variable up, freefall down
  • Cable diameter: 1/4 in (.250) [6.4 mm]
  • Cable length: 300 ft [91.4 m] standard

WIRELINE

• Single line capacity: 1,200 lbs [544.3 kg]
  • Line speed: 0–500 fpm [0–152.4 mpm]
  • Cable diameter: 3/16 in (.185) [4.7 mm]
  • Cable length: 400 ft [121.9 m]
  • standard Winch capacity: 3,500 ft [1,067 m] cable

ESTIMATED OPERATING CAPACITIES

• Hollow stem augers, 4-1/4 in [108 mm] ID: 130 ft [40 m]
• Continuous flight auger, 6 in [152.4 mm] OD: 225 ft [67 m]
• Rotary drilling, NWJ/NW drill pipe: 1,000 ft [305 m]
• Diamond core drilling, N Wireline: 900 ft [275 m]
• Note: Above drilling capacities may vary according to subsur- face conditions, hoist capacity and drilling medium gpm and psi.

SPT AUTOMATIC HAMMER

• ASTM D-1586 standards, standard duty and heavy duty 140 lb [63.5 kg], 170 lb [77.1 kg], 300 lb [136.1 kg], 340 lb [154.2 kg] slugs available
• Hydraulic self compensating

LEVELING JACKS

• Three or four jacks (depending on mounting option)
• 24 in [610 mm] or
• 36 in [914 mm] stroke
• 12 in [305 mm] swiveling round pad at bottom of the jack

OPTIONAL EQUIPMENT

• Mast: 20 ft [6.1 m] or 25 ft [7.6 m]
• In-out slide base/Side-to-side slide base
• Above deck combination auger/rod rack
• Auger racks under body swing out
• Rod trough
• Toolboxes
• Water tanks 100-500 gal [37.5 l–1,892.5 l] steel or stainless steel
• Top mount water swivel
• Standpipe
• Water pumps
• Break-out wrench
• Drive tool quick change adapters
• Rod clamp system
• Driller platform
• Night Lights

NOTE: Engineering specifications are theoretical, actual performance will be different, specifications are subject to change without notice.