HYDRAULIC FEED SYSTEM
- Pulldown Force: 18,400 lbs (8,346 kg)
- Retract Force: 24,500 lbs (11,113 kg)
- Feed Speed, Down: 0-65 ft/min (19.81 m/min) Low, 0-162 ft/min (49.38 m/min) High
- Feed Speed, Retract: 0-48 ft/min (14.63 m/min) Low, 0-122 ft/min (37.19 m/min) High
- Feed Stroke: 14’ (4.27 m), Optional 22-ft (6.71 m) or 24-ft (7.32 m)
- Angle Drill Capable
POWER UNIT
- Deck Engines: Cummins, Deutz Diesel
- PTO: Transmission or Transfer Case
HYDRAULIC PUMPS
- Primary Pump: 36 gpm (136.3 l/min)
- Auxiliary Pump: 24 gpm (90.85 l/min)
DRILL HEAD ROTARY
- Maximum Rotary Speed: 837 rpm (87.65 rad/s)
- Torque: 8,600 ft-lbs (11,660 Nm)
- 15 in (381 mm) Off Hole Side Slide
- 10-Speed
ESTIMATED OPERATING CAPACITIES
- Hollow Stem Auger, 4-1/4 in (108 mm) ID: 250 ft (76.2 m)
- Continuous Flight Auger, 6 in (152 mm) OD: 400 ft (121.92 m)
- Rotary Drilling, 4-1/2 in (114.3 mm) OD Drill Pipe: 1,800 ft (548.64 m)
- Diamond Core Drilling NQ: 5,000 ft (1,524 m)
- Reverse Circulation, 4-1/2 in (114.3 mm) CIP Drill Pipe: 1,200 ft (365.76 m)
HOIST
MAIN
- Single Line Capacity: 12,000 lbs [5,443.1 kg]
- Line speed: 52 ft/min [15.85 m/min]
- Cable diameter: 5/8 in (.625) [15.9 mm]
- Cable length: 100 ft [30.5 m] standard
MAIN
- Single Line Capacity: 8,500 lbs [3,855.5 kg]
- Line speed: 0–75 ft/min [0–22.9 m/min], 0–325 ft/min [0–99.1 m/min] reverse
- Cable diameter: 1/2 in (.500) [12.7 mm]
- Cable length: 100 ft [30.5 m] standard
AUXILIARY
- Single Line Capacity: 4,500 lbs [2,041.2 kg]
- Line speed: 0–135 ft/min [41.2 m/min]
- Cable diameter: 5/16 in (.325) [8.3 mm]
- Cable length: 100 ft [30.5 m] standard
WIRELINE
- Single Line Capacity: 1,200 lbs [544.3 kg]
- Line speed: 0–500 ft/min [0–152.4 m/min]
- Cable diameter: 3/16 in (.185) [4.7 mm]
- Cable length: 400 ft [121.9 m] standard
- Winch capacity: 3,500 ft [1,066.8 m] cable
SAFE-T DRIVER
- Single Line Capacity: 900 lbs [408.23 kg]
- Line speed: variable up, freefall down
- Cable diameter: 1/4 in (.250) [6.4 mm]
- Cable length: 300 ft [91.4 m] standard
OPTIONAL EQUIPMENT
- Above Deck Combination Auger/Rod Rack
- Front mounted auger rack
- Swing-Out Under Body Auger Racks
- Rod Trough
- Rod Loader
- Jib Boom
- Toolboxes
- Water Pumps
- Water Tanks
- Break-Out Wrench
- Make/Break Rod Clamp System
- Tool Guide
- Driller Platform
SPT AUTOMATIC HAMMER
- ASTM D-1586 Standards, Standard Duty and Heavy Duty
- 140 lb (63.5 kg), 170 lb (77.1 kg), 300 lb (136.1 kg), 340 lb (154.2 kg) Slugs Available
- Hydraulic Compensated
- Self Compensating Optional
LEVELING JACKS
- Single Front/Dual Rear, 24 in (609.6 mm) OR
- 36 in (914.4 mm) Stroke
WEIGHT
- Minimum: 8,000 lbs (3628.74 kg)
MOUNTING OPTIONS
- Rubber Track Carrier, Truck (4×2, 4×4, 6×4, 6×6), Trailer
