B45 Mechanical Drill

Specifications

FEED SYSTEM

  • Pulldown force: 15,708 lbs [7,125 kg]
  • Retract force: 24,544 lbs [11,133 kg]
  • Feed speed, down: 53 ft/min [16.2 m/min]
  • Feed speed, retract: 34 ft/min [10.4 m/min]
  • Feed stroke: 6 ft [1.8 m]

HYDRAULIC SYSTEM

  • Tandem hydraulic pumps
    Primary
    Variable displacement load sense pump 28 gpm [106 l/min] @ 3,500 psi [24.0 MPa]
    Auxillary
    Vane type pump, 17 gpm [64.3 l/min] @ 2,500 psi [17.2 MPa]
  • Electric fan type hydraulic oil cooler
  • 40 gal [151.4 l] hydraulic oil tank

POWER UNIT

  • Engines include a 12V starting circuit.
  • All engine gauges located on the control panel.
  • 40 gallon (151.4 l) fuel tank with lock.
  • Lockable battery box.
  • John Deere 4024HF285 Tier 3
    80 Hp (60 kw) @ 2400 rpm, developing 209 ft-lb (283 Nm) torque, water cooled, 2.4 | diesel engine.
  • Deutz TD2011LO4I Tier 3
    75 hp (56 kw) @ 2600 rpm, developing 184 ft-lb (250 Nm) torque, air cooled, 3.62 | diesel engine.

POWER SHIFT TRANSMISSION

  • 4-speeds forward and 1-speed reverse
  • Transmission oil cooled through a dedicated electric fan type cooler
  • 10 micron replaceable oil filter

ESTIMATED OPERATING CAPACITIES

  • Total enclosed “dry box” with tapered roller bearings.
  • 1-3/4” steel Kelly drive bar
  • Open spindle bore: 2 in [50.8 mm]
  • Maximum torque and maximum rpm (engine specific):
    John Deere – 8,085 ft-lb [10,961 Nm] @ 20 rpm, Maximum 618 rpm Deutz – 7,110 ft-lb [9,640 Nm] @ 20 rpm, Maximum 669 rpm

MOUNTING OPTIONS

  • Truck, trailer, track carrier or skid

HOISTS

MAIN

  • Single line capacity: 4,500 lbs [2,041 kg]
    • Line speed: 0–135 fpm [41.2 mpm]
    • Cable diameter: 5/16 in (.325) [8.3 mm]
    • Cable length: 100 ft [30.5 m] standard

SAFE-T DRIVER

  • Single line capacity: 900 lbs [408.2 kg]
    • Line speed: Variable up, freefall down
    • Cable diameter: 1/4 in (.250) [6.4 mm]
    • Cable length: 300 ft [91.4 m] standard

WIRELINE

  • Single line capacity: 1,200 lbs [544.3 kg]
    • Line speed: 0–500 fpm [0–152.4 mpm]
    • Cable diameter: 3/16 in (.185) [4.7 mm]
    • Cable length: 400 ft [121.9 m]
    • standard Winch capacity: 3,500 ft [1,067 m] cable

ESTIMATED OPERATING CAPACITIES

  • Hollow stem augers, 4-1/4 in [108 mm] ID: 130 ft [40 m]
  • Continuous flight auger, 6 in [152.4 mm] OD: 225 ft [67 m]
  • Rotary drilling, NWJ/NW drill pipe: 1,000 ft [305 m]
  • Diamond core drilling, N Wireline: 900 ft [275 m]
  • Note: Above drilling capacities may vary according to subsur- face conditions, hoist capacity and drilling medium gpm and psi.

SPT AUTOMATIC HAMMER

  • ASTM D-1586 standards, standard duty and heavy duty 140 lb [63.5 kg], 170 lb [77.1 kg], 300 lb [136.1 kg], 340 lb [154.2 kg] slugs available
  • Hydraulic self compensating

LEVELING JACKS

  • Three or four jacks (depending on mounting option)
  • 24 in [610 mm] or
  • 36 in [914 mm] stroke
  • 12 in [305 mm] swiveling round pad at bottom of the jack

OPTIONAL EQUIPMENT

  • Mast: 20 ft [6.1 m] or 25 ft [7.6 m]
  • In-out slide base/Side-to-side slide base
  • Above deck combination auger/rod rack
  • Auger racks under body swing out
  • Rod trough
  • Toolboxes
  • Water tanks 100-500 gal [37.5 l–1,892.5 l] steel or stainless steel
  • Top mount water swivel
  • Standpipe
  • Water pumps
  • Break-out wrench
  • Drive tool quick change adapters
  • Rod clamp system
  • Driller platform
  • Night Lights

NOTE: Engineering specifications are theoretical, actual performance will be different, specifications are subject to change without notice.

Pricing & Purchasing Options   Or Call 800-766-3745 for more information.